ELECTRIC MOTOR ABB Electrical resistance of the insulation, МOhm × km: 10.
Item-1_MM_11031324
2HR 1425RPM,1PH,50HZ,182TC,X3646L,XPFC
Ship Weight
121.000 LB
UPC
781568120514
A Product has been discontinued
SPECS
DRAWINGS
NAMEPLATE
PERFORMANCE
PARTS
Catalog Number
Enclosure
Frame
Frame Material
Frequency
Motor Letter Type
Output @ Frequency
Phase
Synchronous Speed @
Frequency
Voltage @ Frequency
XP Class and Group
XP Division
Agency Approvals
CL5027T-50
XPFC
182TC
Steel
50.00 Hz
Cap Start, Induction
Run
2.000 HP@50HZ
1
1500RPM@50 HZ
110.0V@50 HZ
220.0V@50 HZ
CLGPD
Division l
UL
CSA
Lifting Lugs
Locked Bearing Indicator
Motor Lead Exit
Motor Lead Termination
Motor Lead
Quantity/Wire Size
Motor Type
Mounting Arrangement
Number of Poles
Overall Length
Power Factor
Product Family
Pulley End Bearing Type
Pulley Face Code
Pulley Shaft Indicator
Rodent Screen
No Lifting Lugs
Locked Bearing
ELECTRIC MOTOR ABB Electrical resistance of the insulation, МOhm × km: 10.
Ko Box
Flying Leads
4@14AWG,APH
3646L
F¹
4
20.36 IN
78
General Purpose
Ball
C-Face
Standard
None
Ambient Temperature
40℃
Auxillary Box
No Auxilary Box
Auxillary Box Lead
None
Termination
Base Indicator
Rigid
Bearing Grease Type
Polyrex EM(-20F
+300F)
Blower
None
Current @ Voltage
Design Code
L
ELECTRIC MOTOR ABB Electrical resistance of the insulation, МOhm × km: 10.
Drip Cover
No Drip Cover
Duty Rating
CONT
Efficiency @ 100% Load
77.0%
Electrically Isolated Bearing
Not Electrically
Isolated
Feedback Device
NO FEEDBACK
High Voltage Full Load
11.5 a
Amps
Front Face Code
Standard
Front Shaft Indicator
None
Heater Indicator
No Heater
Insulation Class
B
Inverter Code
Not Inverter
KVACode
K
RoHS Status
ROHS COMPLIANT
Service Factor
1.00
Shaft Diameter
1.125 IN
Shaft Extension Location
Pulley End
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Shaft Slinger indicator
No Slinger
Speed
1425rpm
Speed Code
single speed
Motor Standards
NEMA
Starting Method
Direct on line
Thermal Device-Bearing
NONE(OLD)
Thermal Device-
Normally closed
Winding
Thermostat
Vibration Sensor
No Vibration Sensor
Indicator
Winding Thermal 1
None
Winding Thermal 2
None
XP Temp Code
T2C
MOTOR PILOT/HUB – C3 - ???
INPUT SPLINE – 14 - 14T 12/24
RATIO OPTIONS – 42 - 42.42:1
OUTPUT SPINDLE – F7 - ???
SPECIAL FEATURES – Z - Boot Seal
ELECTRIC MOTOR ABB Electrical resistance of the insulation, МOhm × km: 10.
A2, B2, C2
DIM."A"。
Soe Spindie Outout -
Options P.18
12.375(314.33)
13.80(350.5
11.25(285.日)
10.905
7.00
Options P.18
spindle
Output
See
(334.95)
(393.7)
279.4)
15.00
13.187
00
A1,A2:12.42(315.5)+ Dim"A"
B1,B2:11.10(281.9)+Dim "A"
C1,C2:12.33 (313.2)+Dim"A"
D1:13.06(331.7)+Dim"A"
3.74(95.0)-
一.76 (19.3)
2.26(57.4)PREFERRED
-CENTER OF LOAD
A1,A2: 300(7.62)-
B1,B2: 395(10.03)
C1,C2:,520(13.21)
1063(270.00)
口仁
Dimensions given in: INCHES (mm)
-A2,B2,C2-8+oies,Equalty Spaced-
-676--681(17-22-17.30)Dia ThruHeles-
OIL FILL OR
DRAIN PLUG
INPUT
SPLINE
See
Feature
Char
MOUNTING
CHARRT
SEE
Dim"A"
See Spindie Ouput
Options P.18
2.29.
(58.2)
A1,B1,C1,D1
314"-16 UNF-8 holes @ 9.50"dia
"O"RING
REQUIRED
.96
"O" Ring Sizes:
ELECTRIC MOTOR ABB Electrical resistance of the insulation, МOhm × km: 10.
(24.4)
SAE A2-042,
MAX. SHAFT LENGTH
SAE B 2-155,
2.298(58.37)-14T
SAEC 2-159
(Not supplied by Auburn Gear)
1.01(25.7) PREFERRED
CENTER OF LOAD
MOTOR TOBE MOUNTED
WITH OIL SEALING BOLTS
OIL FILL OR
DRAIN PLUG
Ouput
Rotation
is Same As
Input Rotation
A1, B1,C1, D1:10 Holes, Equally Spaced
.847 -.850 (21.51 — 21.59) Dia. Thru Holes
|
9 |
PUMP RZ-30 (SH 40-4-19,5/4 with a frame and an electric motor |
Pump capacity, kW: 5.5 Rotation speed, r.p.m.: 1,000 Temperature of the transported medium, °С: 0-80 Pump efficiency, %, not less than: 60 Admissible NPSH, m, not more than: 15 Pump purpose: to pump lubricants Outlet pressure - 4atm Q (delivery), m3/h: 19.5 motor type: AOLS2-22-4; electric motor power, kW: 5.5; voltage, V: ̴ 380; insulation class: F; Main dimensions (interaxial longitudinal and transverse distances along the centers of the pump supporting "legs", the height from the bearing area to the shaft axis, and the dimensions along the areas of the suction and delivery nozzle ends) need to be clarified and agreed on with the client. |
2 |
|
|
The Sub-contractor’s warranty obligations mean the quality guarantees of pumps, and guarantees of their operation quality during the warranty period, as well as the obligations to remove, at its own expense, the article defects revealed during the warranty period or to replace the respective equipment unless it proves that the defects have occurred as a result of violation by the Client of article operation or storage rules. The warranty obligations should be fulfilled by the subcontractor provided that the Recipient meets the requirements of the manufacturer’s instruction on operations. The warranty obligations are specified in the pump operation instruction, or in any other document which is a part of the operational documentation of the bidder.
|
||
Warranty – at least 2 years.
These specifications provide “minimum” requirements. Participants are also encouraged to quote items that have substantially equivalent or better characteristics.
Availability of service centre in Ukraine is mandatory.
LOT 2 ElECTRIC DISTRIBUTION CABLES
PLACE OF DELIVERY: DAP KYIV
Object: Electric distribution cables - 20320 m var. types
Specification in the table below:
|
# |
Type |
Technical data |
Quan-tity, m
|
|
1 |
Cable KVVGng 4Х1,5 |
1. Number of cores, pcs.: 4. 2. Cross-section of the core, mm²: 1.5. 3. Electrical resistance of the core, Ohm / km: 12.1. 4. Electrical resistance of the insulation, МOhm × km: 10. 5. Core: copper round monolithic . 6. Rated current per core, А: 23. 7. External diameter of the cablle, mm: 9.3. 8. Bulk weight, kg/m: 0.129. 9. Thickness of insulation, mm: 0.6. 10.Thickness of the cable sheath, mm: 1.5. 11. Environment temperature, °С: from - 50 to +50. 12. Relative humidity of the air at the temperature +35°С, %, not more than: 98. 13. Admissible continuous temperature of the core heating, °С, not more than: 70. 14. Sheath from the PVC plasticate with the reduced combustibility. |
3430 |
|
2 |
Cable KVVGng 5х1,5 |
1. Number of cores, pcs.: 5. 2. Cross-section of the core, mm²: 1,5. 3. Electrical resistance of the core, Ohm / km: 12,1. 4. Electrical resistance of the insulation, МOhm × km: 10. 5. Core: copper round monolithic. 6. Rated current per core, А: 23. 7. External diameter of the cablle, mm: 10. 8. Bulk weight, kg/m: 0,153. 9. Thickness of insulation, mm: 0,6. 10. Thickness of the cable sheath, mm: 1,5. 11. Environment temperature, °С: from - 50 to +50. 12. Relative humidity of the air at the temperature +35°С, %,not more than: 98. 13. Admissible continuous temperature of the core heating, °С,not more than: 70. 14. Sheath from the PVC plasticate with the reduced combustibility |
705 |
|
3 |
Cable KVVGng 7х1,5 |
1. Number of cores, pcs.: 7. 2. Cross-section of the core, mm²: 1,5. 3. Electrical resistance of the core, Ohm / km: 12,1. 4. Electrical resistance of the insulation, МOhm × km: 10. 5. Core: copper round monolithic. 6. Rated current per core, А: 23. 7. External diameter of the cablle, mm: 10,8. 8. Bulk weight, kg/m: 0,196. 9. Thickness of insulation, mm: 0,6. 10. Thickness of the cable sheath, mm: 1,5. 11. Environment temperature, °С: from - 50 to +50. 12. Relative humidity of the air at the temperature +35°С, %,not more than: 98. 13. Admissible continuous temperature of the core heating, °С,not more than: 70. 14. Sheath from the PVC plasticate with the reduced combustibility |
910 |
|
4 |
Cable KVVGng 10х1,5 |
1. Number of cores, pcs.: 10. 2. Cross-section of the core, mm²: 1,5. 3. Electrical resistance of the core, Ohm / km: 12,1. 4. Electrical resistance of the insulation, МOhm × km: 10. 5. Core: copper round monolithic. 6. Rated current per core, А: 23. 7. External diameter of the cablle, mm: 13,4. 8. Bulk weight, kg/m: 0,271. 9. Thickness of insulation, mm: 0,6. 10. Thickness of the cable sheath, mm: 1,5. 11. Environment temperature, °С: from - 50 to +50. 12. Relative humidity of the air at the temperature +35°С, %,not more than: 98. 13. Admissible continuous temperature of the core heating, °С,not more than: 70. 14. Sheath from the PVC plasticate with the reduced combustibility |
2140 |
|
5 |
Cable KVVGng 14х1,5 |
1. Number of cores, pcs.: 14. 2. Cross-section of the core, mm²: 1,5. 3. Electrical resistance of the core, Ohm / km: 12,1. 4. Electrical resistance of the insulation, МOhm × km: 10. 5. Core: copper round monolithic. 6. Rated current per core, А: 23. 7. External diameter of the cablle, mm: 14,4. 8. Bulk weight, kg/m: 0,354. 9. Thickness of insulation, mm: 0,6. 10. Thickness of the cable sheath, mm: 1,5. 11. Environment temperature, °С: from - 50 to +50. 12. Relative humidity of the air at the temperature +35°С, %,not more than: 98. 13. Admissible continuous temperature of the core heating, °С,not more than: 70. 14. Sheath from the PVC plasticate with the reduced combustibility |
740 |
|
6 |
Cable KVVGng 19х1,5 |
1. Number of cores, pcs.: 19. 2. Cross-section of the core, mm²: 1,5. 3. Electrical resistance of the core, Ohm / km: 12,1. 4. Electrical resistance of the insulation, МOhm × km: 10. 5. Core: copper round monolithic. 6. Rated current per core, А: 23. 7. External diameter of the cablle, mm: 16. 8. Bulk weight, kg/m: 0,460. 9. Thickness of insulation, mm: 0,6. 10. Thickness of the cable sheath, mm: 1,5. 11. Environment temperature, °С: from - 50 to +50. 12. Relative humidity of the air at the temperature +35°С, %,not more than: 98. 13. Admissible continuous temperature of the core heating, °С,not more than: 70. 14. Sheath from the PVC plasticate with the reduced combustibility |
90 |
|
7 |
Cable KVVGng 27х1,5 |
1. Number of cores, pcs.: 27. 2. Cross-section of the core, mm²: 1,5. 3. Electrical resistance of the core, Ohm / km: 12,1. 4. Electrical resistance of the insulation, МOhm × km: 10. 5. Core: copper round monolithic. 6. Rated current per core, А: 23. 7. External diameter of the cablle, mm: 19,4. 8. Bulk weight, kg/m: 0,652. 9. Thickness of insulation, mm: 0,6. 10. Thickness of the cable sheath, mm: 1,5. 11. Environment temperature, °С: from - 50 to +50. 12. Relative humidity of the air at the temperature +35°С, %,not more than: 98. 13. Admissible continuous temperature of the core heating, °С,not more than: 70. 14. Sheath from the PVC plasticate with the reduced combustibility |
965 |
|
8 |
Cable KVVGng 14х2,5 |
1. Number of cores, pcs.: 14 2. Cross-section of the core, mm²: 2,5 3. Electrical resistance of the core, Ohm / km: 18,1. 4. Electrical resistance of the insulation, МOhm × km: 10. 5. Core: copper round monolithic. 6. Rated current per core, А: 23 7. External diameter of the cablle, mm: 16,5. 8. Bulk weight, kg/m: 0,0,441. 9. Thickness of insulation, mm: 0,6. 10. Thickness of the cable sheath, mm: 1,5. 11. Environment temperature, °С: from - 50 to +50. 12. Relative humidity of the air at the temperature +35°С, %,not more than: 98. 13. Admissible continuous temperature of the core heating, °С,not more than: 70. 14. Sheath from the PVC plasticate with the reduced combustibility |
90 |
|
9 |
Cable KVVGEng 4Х1,5 |
1. Number of cores, pcs.: 4. 2. Cross-section of the core, mm²: 1,5. 3. Electrical resistance of the core, Ohm / km: 12,1. 4. Electrical resistance of the insulation, МOhm × km: 10. 5. Core: copper round monolithic. 6. Rated current per core, А: 23. 7. External diameter of the cablle, mm: 10. 8. Bulk weight, kg/m: 0,2. 9. Thickness of insulation, mm: 0,6. 10. Thickness of the cable sheath, mm: 1,5. 11. Environment temperature, °С: from - 50 to +50. 12. Relative humidity of the air at the temperature +35°С, %,not more than: 98. 13. Admissible continuous temperature of the core heating, °С,not more than: 70. 14. Sheath from the PVC plasticate with the reduced combustibility 15. Availability of the screen: aluminium foil. |
7950 |
|
10 |
Cable KVVGEng 5х1,5 |
1. Number of cores, pcs.: 5. 2. Cross-section of the core, mm²: 1,5. 3. Electrical resistance of the core, Ohm / km: 12,1. 4. Electrical resistance of the insulation, МOhm × km: 10. 5. Core: copper round monolithic. 6. Rated current per core, А: 23. 7. External diameter of the cablle, mm: 11. 8. Bulk weight, kg/m: 0,22. 9. Thickness of insulation, mm: 0,6. 10. Thickness of the cable sheath, mm: 1,5. 11. Environment temperature, °С: from - 50 to +50. 12. Relative humidity of the air at the temperature +35°С, %,not more than: 98. 13. Admissible continuous temperature of the core heating, °С,not more than: 70. 14. Sheath from the PVC plasticate with the reduced combustibility 15. Availability of the screen: aluminium foil. |
1965 |
|
11 |
Cable KVVGEng 10х1,5 |
1. Number of cores, pcs.: 10. 2. Cross-section of the core, mm²: 1,5. 3. Electrical resistance of the core, Ohm / km: 12,1. 4. Electrical resistance of the insulation, МOhm × km: 10. 5. Core: copper round monolithic. 6. Rated current per core, А: 23. 7. External diameter of the cablle, mm: 14. 8. Bulk weight, kg/m: 0,36. 9. Thickness of insulation, mm: 0,6. 10. Thickness of the cable sheath, mm: 1,5. 11. Environment temperature, °С: from - 50 to +50. 12. Relative humidity of the air at the temperature +35°С, %,not more than: 98. 13. Admissible continuous temperature of the core heating, °С,not more than: 70. 14. Sheath from the PVC plasticate with the reduced combustibility 15. Availability of the screen: aluminium foil. |
1035 |
|
12 |
Cable KVVGEng 14х1,5 |
1. Number of cores, pcs.: 14. 2. Cross-section of the core, mm²: 1,5. 3. Electrical resistance of the core, Ohm / km: 12,1. 4. Electrical resistance of the insulation, МOhm × km: 10. 5. Core: copper round monolithic. 6. Rated current per core, А: 23. 7. External diameter of the cablle, mm: 15. 8. Bulk weight, kg/m: 0,44. 9. Thickness of insulation, mm: 0,6. 10. Thickness of the cable sheath, mm: 1,5. 11. Environment temperature, °С: from - 50 to +50. 12. Relative humidity of the air at the temperature +35°С, %,not more than: 98. 13. Admissible continuous temperature of the core heating, °С,not more than: 70. 14. Sheath from the PVC plasticate with the reduced combustibility 15. Availability of the screen: aluminium foil. |
300 |
|
|
Manufacturing warranty and Service life must comply with the passport data of the manufacturer. In any case, the warranty cannot be less than 2 years. |
||
