Yantai Bonway Manufacturer

sew-eurodrive (suzhou) co. ltd

Good morning.
Please find our Proforma Invoice attached.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.

With best regards
Cherry

Please find attached our PO # 18186 for sample motors. There is a total of three motors being ordered. They are all 1/2HP. The only different is the speed. Two are 3000rpm and one is 3200rpm. The 30 amp max can be controlled by the customer.
Please let me know if you have any questions.
Best regards,

Good evening!
Yes,we can supply.And the EX-work price of sample is still 450USD per uint.
And the manufacture time is about 15 days.
Any other queestions,please contact with me.
Thanks.
Looking forward to hearing from you

Good morning!
Sorry,as your motors are with Nema standard,we don't have specs now.
And we can supply the samples,but them are with IEC flange instead of NEMA flange and the EX-work price are as follows:
1/3hp motor's sample:390USD per unit.
1/2HP motor's sample:450USD per unit.

And the manafacture time is about 15 days.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.

sew-eurodrive (suzhou) co. ltd

Good morning!
Sorry,as your motors are with Nema standard,we don't have specs now.
And we can supply the samples,but them are with IEC flange instead of NEMA flange and the EX-work price are as follows:
1/3hp motor's sample:390USD per unit.
1/2HP motor's sample:450USD per unit.
And the manafacture time is about 15 days.
Should you have any other questions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.

Glad to receive your new inquiry.
And the EX-work price for 12VDC electric motor are as follows:
1/3hp motor:26USD per unit.
1/2HP motor:34USD per unit.
Any other qestions,please feel free to contact me.
Thanks.
Looking forward to hearing from you.

I have a new customer that has a requirement for a motor that I believe NER can supply. At this time we are only looking for an estimated price. We do not need a formal quote at this time. Here is what we are looking for:

12 VDC
15-30 Amp range
3000 – 3400 RPM range
56C or 56J Flange
Please price in both 1/3hp and 1/2hp
MOQ 500 pieces

We do not know our target price at this point. However, if quote successfully, our MOQ will go above 1000 pieces.

Is it possible to provide me with an estimated price today?


We are not only to supply you high quality machinery , but also the excellent after sales service.
Should anything unforeseen ever occur, we will make sure your machine is back up and running again quickly.
Experienced service engineers will offer you any technical support.
Delivery time:In time delivery will be ensured as we just introduced one more production line recently.
MOQ:Any order quantity is welcome.
Thank you.
Looking forward to hearing from you.

sew-eurodrive (suzhou) co. ltd

Good evening!
Yes,we can supply.And the EX-work price of sample is still 450USD per uint.
And the manufacture time is about 15 days.
Any other queestions,please contact with me.
Thanks.
Looking forward to hearing from you.

Can you supply a sample motor that is ½ hp, 12V IEC80? It can be either S1 or S2. What is the price and lead time for samples?

This is for the same customer that we just quoted but a different project they are working on.

Thank you,

Thank you for your email.
Sorry,now we don't have specs including performance curves for this motor.
And the unit price based on 500 pieces for DC motor with Nema flange had been sent to you in my previous email that has been attached to here for your reference,please kindly check.

Thanks.
Looking forward to hearing from you.

What about performance curves for this motor? Are they available?

Also, if we purchase a min of 500 pieces, with the NEMA flange, what is our firm price?


Best regards,

As I told you in my previous Email,I have consulted our engineer,we don't have specs for the DC motor now and will offer dimensions to you after you place the order.
Hope you could understand.
Thanks.