MOTOR,ELEC,ABB,3GKP082310-BDH,0.55KW Motors, Electric
technical specifications
Standard Assignment 4.1
Procurement of reducers for the concentration and centrifugation department of SOF-4RU workshop
1. Driving characteristics and working properties
The reducer should comply with the requirements of standard technical task 4.1 "JSC Belaruskali General Industrial Equipment Procurement Technical Task Book", this requirement, and drawings 1-2
Metso LTC2200-15 Plate Thickener Comb Drive Mechanism
Working method, daily duration, hourly weight, 24 hours
Reversible or irreversible operation
2. Full name of reducer
Type and brand wheelbase rated transmission ratio meshing type assembly options GOST 20373 Climate design and placement category GOST 15150
Planetary reducer gb12015hs planetary reducer 8585:1
6225:1 planetary transmission U1
MOTOR,ELEC,ABB,3GKP082310-BDH,0.55KW Motors, Electric
3. Additional Options and Conditions
Vertical relative position of gearbox
Vertical bolt fixation of reducer
Shell material steel
Design of planetary reducer housing,
Vertical design
Type of entry shaft, diameter, mm. The motor shaft is the reducer entry shaft, Ø 28 mm (see Figure 1-2)
Output shaft type:
(a) Solid aperture;
B. Hollow, diameter suitable for landing.
Solid flange and adjusting washer Ø 450 mm (see Figure 1-2)
Required torque on the output shaft of the reducer, MCR (N) working torque (N) 130000 Nm
Breaking torque (maximum) 175000 nm
The size from the bottom of the shell to the connector, in mm, as shown in Figure 1-2
The lubrication and cooling type of the reducer is synthetic transmission oil. Air cooling,
environment
Additional:
Input shaft revolutions, RPM 1440
Output speed, rpm 0.20
Dimensions and connection dimensions (as shown in Figures 1-2)
Spiganovich
T. 4404
|
MOTOR,ELEC,ABB,3GKP082310-BDH,0.55KW Motors, Electric Voltage 400 V Frequency 60 Hz Phase 3 Full load current 1.67 A Frame size 80 Method of mounting IMB5/IM3001 (FLANGED) Insulation class F Classification hazardous EX DE IIB/IIC T4 GB Ambient temperature -20 TO +45 °C Method of cooling IC 411 Speed 1707 rpm Power rating 0.66 kW Model number M3KP 80MA Power factor 0.79 Manufacturer ABB Manufacturer Part Number 3GKP082310-BDH VENDOR DOCUMENT REQUIREMENTS: N01 Installation, Commissioning, Operating & Maintenance Manuals N01 Installation, Commissioning, Operating & Maintenance Manuals |
1 |
|
MOTOR,ELEC,ABB,3GKP204410-BDG,400V,15KW |
1 |
|
MOTOR,ELEC,ABB,M3KP200MLC2,440V,43KW |
1 |
|
MOTOR,ELEC,ABB,M3GP200MLA10,400V,11KW Motors, Electric Type of motor SQUIRREL CAGE INDUCTION Voltage 400 V +/- 10% Frame size FS200 Speed 587 r/min Power rating 11 kW Manufacturer ABB Manufacturer Part Number M3GP200MLA1 VENDOR DOCUMENT REQUIREMENTS: K30 Technical Passport N01 Installation, Commissioning, Operating & Maintenance Manuals K30 Technical Passport |
1 |
|
MOTOR,ELEC,ABB,AXR400MJ4,250KW |
1 |
|
MOTOR,ABB,3GKP083310-ASH,400VAC,50HZ |
1 |
|
MOTOR,ABB,M2JA90S23GJA091110-ASBG+,1,5KW |
1 |
Please update PI 2019081408P dated 2019-8-14:
XWD10-43-18,5kW - 1psc
XLD5-35-4kW - 2psc
Hello Christine,
please send PI in RMB with SNAPS CODE
XWD10-43-18.5kW - 1psc
BWD5-59-11kW - 1psc
BWD3-59-2.2kW - 2psc
Hello Christine,
We confirmed drawing for
XLD5-35-4kW -
Hello Christine,
Please update PI 2019081408P dated 2019-8-14:
XWD10-43-18,5kW - 1psc
XLD5-35-4kW - 2psc
Hello Christine,
please send PI in RMB with SNAPS CODE
XWD10-43-18.5kW - 1psc
BWD5-59-11kW - 1psc
BWD3-59-2.2kW - 2psc
Dear Alexander,
Have a nice day!
Gear Reducer with Motor Price:
1. Type: XWD10-43-18.5kW
Ex-works Price: 2180 USD/Pcs
2. BWD5-59-11kW
Ex-works Price: 923 USD/Pcs
3. BWD3-59-2.2kW
Ex-works Price: 678 USD/2Pcs
Hello Christine,
please add to PI 2019081408P next pos:
WB100-LD59-0.55kW d=18Fl - ca 818.00 RMB - 1psc
+
Gear Reducer with Motor Price: Type: WB85-WD-29-0.25KW Ex-works Price: 88 USD/Pcs - 1psc
Hello Christine,
We confirmed drawing for
XLD5-35-4kW -
Dear Alexander,
Have a nice day!
MOTOR,ELEC,ABB,3GKP082310-BDH,0.55KW Motors, Electric
Ok, thank you for the update.
So the drawing for XLD5-35-4KW is ok for you?
Then how about another model XWD10-43-18.5KW, have you confirmed it?
Please kindly let us know the confirmed result soon, then we can arrange the production for you soon.
Also, for the new add model BWD3-43-3KW-CZ {BWY22-43-3Kw} of PI, do you want to also make a order?
Waiting for your kindly reply.
Thanks & Best Regard,
ChristineРисунок удален отправителем.
DEAR SIR
PLS FIND THE DETAILS WITH NAME PLATE
1 Rotary Gear Box BLEY3318-187-Y4 2 pcs
code- BLED52-187-Y4-ZP-H,NO- SN0074208
2 Gear Box- Type- ZSY200-63 1 pcs
Ratio: 63:1 Req. Gear Box- Type- ZSY200-63
3 Gear Box- Type/Diameter -1600, Ratio-93:1 1 pcs
Model: 1600 For Disk Feeder
4. ROLLER SCREEN GEAR BOX , XHD8115-17-YX3/1.5-270, 10 pcs
SL NO-SN0141450
Dear Alexander,
Good day to you!
I'm write to inform you that we received your new order payment today, and thanks a lot again for the payment.
Now we're ready to arrange the production for you, about the order's second model XLD5-35-4kW, do you have the nameplate or dimensions?
If yes, please kindly send us, and then we can check and arrange the production soon. Thank you!
Waiting for your kindly reply.
Thanks & Best Regard,
Christine
Hi Christine.
On page 17 of your catalogue
D110BLD2000-48A-20S
It says 52A and less than 16A
Please kindly explain.
Regards,
Idris.
Hi Christine Zhu
Hi,
I’m interested in your product 10 hp 3 phase motor 12v dc induction electric motor, I would like some more details.
I look forward for your reply.
Regards,
Idris Hassanali
Dear Alexander,
Good day to you!
I'm write to inform you that we received your new order payment today, and thanks a lot again for the payment.
Now we're ready to arrange the production for you, about the order's second model XLD5-35-4kW, do you have the nameplate or dimensions?
If yes, please kindly send us, and then we can check and arrange the production soon. Thank you!
Waiting for your kindly reply.
Thanks & Best Regard,
Christine
Hello,
Motor gear GKA87-Y15-4P-16,6 - 1psc
Motor gear GKAT87-Y5,5-4P-31,39 - 1psc
Thank you Christine.
We have one more pos for order, pls add in the last PI.
BWD4-59-5,5kW – 1psc (ca 3796RMB)
We pay ASAP!!!!
Hi Christine Zhu
Hi,
I’m interested in your product 7.5 kw 10 hp 3 phase electric motor with aluminium housing, I would like some more details.
I look forward for your reply.
Regards,
ayub hassan
Dear Alexander,
Good day to you!
About your new request, we confirmed them, and the best quotation as follow:
1. Type: WB120- WD11- 0.75kW (gearbox with motor)
Ex-works Price: 289USD/1 Pcs
2. Type: Y2-112M-6 (motor)
Ex-works Price: 153 USD/1 Pcs
3. Type: BLY 2718-473-1,1kW (gearbox with motor)
Ex-works Price: 625 USD/1 Pcs
Waiting for your kindly reply.
Thanks & Best Regard,
Christine
Hello,
WB120- WD11- 0.75kW- 1psc https://yadi.sk/i/SXD3oZxmMvTlxQ
Motor 2.2kW - 1psc https://yadi.sk/i/yuldyCDgE5usVQ
BLY 2718-473-1,1kW - 2psc
Hi Christine Zhu
Good day Please send me a price list on your motors to import to South Africa for resale 031 4683371 Rajen Govender
7.5 kw 10 hp 3 phase electric motor with aluminium housing
Hi Christine Zhu
I am searching for a inline reductor motor. specs: - 400v - 50HZ - 0,09 KW - incoming rpm: 1400 - outgoing rpm: 4,5 - outgoing shaft dimensions ø25mm x 60mm could you supply me with this part?
Dear sir/Ms.
Kindly provide us with the best price for the following items:
1- 3-Phase AC Drive ACS850, Power 15 kW at 400 V
model : ACS850-04-030A-5
Manuf.: ABB
QTY:3
2- Inverter 37 kW, 74 A, CASE: IP20
MODEL: ACS850-04-078A-5
Manuf.: ABB
QTY:1
3- Inverter 22 kW, 46 A, CASE: IP20
MODEL :ACS850-04-050A-5
Manuf.: ABB
QTY:3
4- Inverter 110 kW, 220 A, CASE: IP20 +D150 Braking Chopper
MODEL: ACS850-04-225A-5+D150
Manuf.: ABB
QTY:1
5- Soft Starter PSE, 143A, Ue=110...250Vac (PSE17060070)
Model: PSE170-600-70
Manuf.: ABB
QTY:1
Hi Christine Zhu
I am searching for a inline reductor motor. specs: - 400v - 50HZ - 0,09 KW - incoming rpm: 1400 - outgoing rpm: 4,5 - outgoing shaft dimensions ø25mm x 60mm could you supply me with this part?
Dear Nastya,
Good day to you!
Thank you for your confirmation.
Ok, according to your motor nameplate, the best price as follow:
Type: YVP-100L-2
EX-works Price: 185USD/Pcs;
Motor Power: 3 KW;
Motor Speed: 2850RPM;
400/460V&50/60HZ &IP54;
See the attached real photo.
Waiting for your kindly reply.
Thanks & Best Regard,
Christine
Dear Sirs
We are a specialized trading co in Cairo Egypt .
Kindly send us your offer for the suitable equivalent type for the following PIV gear unit :
Flender PIV gear unit .
Type : ESA 16 / 19 - 30
P2 : 0.3 - 0.2 kw
n1 : 112 rpm
n2 : 158 - 79 rpm
Input shaft diameter : 22 mm
Out put shaft diam : 25 mm
T2 : 18 - 24 Nm
Please check the enclosed drawing for the Flender unit .
Dear Nastya,
Good day to you!
Thank you for your confirmation.
Ok, according to your motor nameplate, the best price as follow:
Type: YVP-100L-2
EX-works Price: 185USD/Pcs;
Motor Power: 3 KW;
Motor Speed: 2850RPM;
400/460V&50/60HZ &IP54;
See the attached real photo.
Waiting for your kindly reply.
Thanks & Best Regard,
Christine
Hi Christine Zhu
Hi, I’m interested in your product Three phase 220v 2200w ac motor single-phase electric motor 220v 4hp, I would like some more details. I look forward for your reply.
Hi,
Good day! Please check?
2Pcs INDUCTION MOTOR, 2.2KW 1435RPM 440V 3PHA Brand: Siemens Frame Model: FDU1605/2308886 002 Reference Serial No.: 2KO1504-3FM13-
1HQ1-Z 2.2 kw, 440 volts, 60 hz, 3-phase RPM: 1435 rpm Degree of Protection: IP55 Insulation Class: f IMB5 Flange/Mounted Cast-iron Motor Frame
Thanks,
Jack
Thank you Christine.
We have one more pos for order, pls add in the last PI.
BWD4-59-5,5kW – 1psc (ca 3796RMB)
We pay ASAP!!!!
Can you pls quote for Reduction Gear.as per following parameters:;'
GEAR UNIT,
P1=29 KW,
N2=37RPM,
H=3000,
Used for KILN FEED SCREW CONVEYORS,
Pls also send your drawing
Hi Christine Zhu
hello. I need an electric motor with the following characteristics: motor Power: 315 kW * Frequency rotation speed: 1480 rpm * Voltage: 380/660 V • Rated current: 559 A * efficiency: 95.2 % * Coefficient power (sosf) = 0.9 * the Multiplicity of the starting current In / In = 6.9 • ratio of starting torque to rated torque torque MP/Mn = 2,1 • the ratio of the maximum moment to nominal torque Mmah / Mn = 2,2 * Degree of protection: IP55. if you have such an engine, please give me an official invoice with signature and stamp. we need 1 unit
Hi Christine Zhu
Bonjour, Je suis intéressé par votre produit . - Engines : - 11kw 1500tours/min - 7,5kw 1500tours/min and 3000tours/min - 5.5kw 1500tours/min and 3000 tours/min - 4kw 1500tours/min and 3000tours/min - 3kw1500tours/min and 3000tours/min , J'aimerais avoir plus de détails. Dans l'attente de votre réponse. Salutations, Winsa Xavier phone/whatsapp: +22997087106 wechat id: winsaxavier121961 e-mail box: winsaxavier@yahoo.
Dear Christine,
My congratulations, your response is
first and very fast.
T2 (output) = 6,25..8,2 kNm or 6250...8200 Nm
T1 (input) = 200...220 Nm
Vladimir
Dear Cristine
with the demand for 3-phase power supply suppliers by end users, namely the work of procuring 3-phase induction motor replacement, 380 VAC, 50HZ, S1 which will be held in February 2020.
from some of the attached motor items, and you have a motor with the same Motor Power (kW / HP), Voltage (380VAC) and engine Rotation speed (RPM).
We hope to be able to get an electric motor price quote from your product.
Thank you for your attention and cooperation.
Best regards.
MOTOR,ELEC,ABB,3GKP082310-BDH,0.55KW Motors, Electric
Dear Christine,
How are you?
As per wechat discussion i would like to share the details of the required gears kindly
check and send availability with prices .
1 41K25GN-C/5GN-10K ( as per given photograph)
2 5Ik40RGN-C/5GN5K
3 5IK40GN-C/5GN10K
4 NMRV50-60-Y0.37KW-4P
5 NMRV50-25-Y0.37KW-4P
6 NMRV63-7.5-Y0.75KW-4P
7 NMRV63-20-Y0.75KW-4P
8 NMRV75-7.5-Y1.5KW-4P
9 NMRV75-20-Y01.5KW-4P
10 NMRV30-30-Y0.18KW-4P
All the above mentioned items required quantity is 20 Pcs each,
If any query feel free to contact us, i hope you will consider and provide me best competitive price.
Thanks & Regards
Jahangir Iqbal
FloorTech
Dear Christine,
My congratulations, your response is
first and very fast.
T2 (output) = 6,25..8,2 kNm or 6250...8200 Nm
T1 (input) = 200...220 Nm
Vladimir
Hi Christine,
I already answer that it will not fit.
I need to have the exact same motor JZ 6025 (60180) 220V/50Hz 35W
What is the price and how fast can i receive it?
Please let me know,
Frank
Dear Christine
For Item No. 185 please note that the requirement is One Unit ( ONE Battery Box containing 24 batteries 48V630AH ). So it is one unit containing 24 batteries.
Please amend your offer accordingly
Best regards
Hi Christine Zhu
Good Day ..I wonder if you can supply my inquiry MOTOR,IND, 400V,2.1A,928RPM,0.75KW,90S,B3 delivery to Iraq .please provide me the price and datasheet with COO, COI, COC .Thank you.
Dear Kadhum,
Glad to receive your inquiry, this is Christine from NER GROUP CO.,LIMITED in China.
About your request, we confirmed it, and the best price as following:
Type: Y2-90S-6
EX-works Price: 185USD/Pcs;
Motor Power: 0.75 KW;
Motor Speed: 928RPM;
400V&50HZ&2.1A&IP54;
See the attached real photo.
Waiting for your kindly reply.
Thanks & Best Regard,
Christine
Dear Christine, Can you send us a quotation about the following item below:
Gearboxes(Worm gearboxes reducers), with electrical motor, NMRV 150 rate: 1:40, frame 112, indicate torque: Nm. Output Hole 50 mm, indicate S.F:. Motor, horse power: 5.50 HP or 6 HP, 1800 rpm (04 pole), tension 220/380/440 volts, 03 phases, 60 Hz. Frame 112, shaft 28 mm. 02 equipment. See file attachment.
Note. Include in your quote freight cost to Peru by air way and delivery time. We hope your answer asap and their technical data about gearboxes and motors.
B rgds,
German
MOTOR,ELEC,ABB,3GKP082310-BDH,0.55KW Motors, Electric
Dear Christine,
Schneider genuine factory mentioned clearly the current and voltage against each part number as per Schneider catalogues. You are requested to go through model number data sheet in Schneider web site, which you will find each part codes are included with voltage and rated current.
However please note that the voltage in single phase is 230V AC,50HZ,THREE PHASE IS 400V/50HZ.
Best Regards
Engineer Bilal Mahmood
Dear Christine,
From the below link, I can see this (PLE80 servo motor planetary gearbox ratio 40:1 for 400W AC servo motor):
1/ PLE80 servo motor planetary gearbox
2/ ratio 40:1
3/ 400W AC servo motor
https://www.aliexpress.com/item/planetary-reducer-professional-manufacturer/2044865876.html
Please advise if you need more information.
Thanks and Best Regards,
Dear Christine,
As you said as following:
1. It's is correct for both motor power 0.75kW and 1.5kW, because these 2 powers are within the safe operating power range of this gearbox, please feel free to use them.
My customer’s questions as following:
- For the gearbox with motor power 0.75kW, please advise the Service Factor (Safety Factor) of this gearbox
- For the gearbox with motor power 1.5kW, please advise the Service Factor (Safety Factor) of this gearbox
Best Regards,
