GEARBOX: TYPE: BEVEL HELICAL; RATIO: 14:1; SPEED: 1476/101.16 RPM; POWER: 151 KW; SHAFT SIZE: 50K6/105M6 MM; APPLICATION:
Dear All,
We are interested to buy 2pcs of below:
=wrom gear reducer type NMRV or equivalent+brake motor
We need to obtain below parameters:
=output moment close to 180 Nm
=outlet speed 11..14 rev/min
=motor power close to 0.75 kw
Can you help me pls?
BEST REGARDS
GABRIEL EPURE
MANAGER
How are you? Since last inquiry, I have a new one from the same customer: 30KW, 3000RPM AC motor. Plz kindly send me the datasheet and quotation in WORD format. I will revise the price myself. Plz advise it.
How much
Electro Motor power 480 KW,3 Phase,380 VAC/50 Hz,4 Poles,IEC Frame Size 400L,Foot Mounting B3, SPEK MOTOR :
MERK ABB
TYPE M2BA400LB4
FRAME 400L
KW 480 KW
VOLT 380 V
POLE 4
Or equivalen abb
This is Abhishek Raghav from synco industries.
Here the specifications which I am looking for .
1)Motor power : 5 HP
2)8000rpm (max) looking for a variable speed motor.
3)420 V & 60 Hz.
Quantity I can tell you once I am satisfied with the specifications of the product.
We are a shot blasting and sand blasting manufacturing company we are right now into the R&D of a new machine.
Once your product fits and suits the calculation you can expect a good amount of order.
You can contact me on call or either on WhatsApp or on we chat.
+91 8185025263
As you said as following:
1. It's is correct for both motor power 0.75kW and 1.5kW, because these 2 powers are within the safe operating power range of this gearbox, please feel free to use them.
My customer’s questions as following:
- For the gearbox with motor power 0.75kW, please advise the Service Factor (Safety Factor) of this gearbox
- For the gearbox with motor power 1.5kW, please advise the Service Factor (Safety Factor) of this gearbox
GEARBOX: TYPE: BEVEL HELICAL; RATIO: 14:1; SPEED: 1476/101.16 RPM; POWER: 151 KW; SHAFT SIZE: 50K6/105M6 MM; APPLICATION:
Thank you for your information as below:
-For the gearbox with motor power 0.75kW, the Service Factor (Safety Factor) is 3.95.
-For the gearbox with motor power 1.5kW, the Service Factor (Safety Factor) is 1.95.
Do you have any document or datasheet which mentions about the Service Factor (Safety Factor) as above? If YES, please kindly send them to me so that I can send them to our customer for their consideration.
Good day! Please quote the ff: ASAP!
1UNT MOTOR, 11KW 1780/40RPM 440V 3-PHASE
INDUCTION MOTOR
Geared Motor
Brand: ABB Motor
11 kw, 440 volts, 60 hz, 3-phase
Motor Speed: 1780
Gearbox Output: 40 rpm
Gearbox Shaft Diameter: 120 mm
Mounting Base Dimension (front): 50 mm
Mounting Base Dimension (side): 57 mm
Height (from center gearbox shaft to base): 37 mm
IE3 Standard
About the recommend type of gearbox P2HH5-16-C , have you confirm it?
If you have any different comment of this drawing dimensions, please don't hesitate to contact us.
Thank you in advance!
Thanks a lot for your confirmation!
Follow your request, the confirmed answer as below:
1. Output torgue max: M2=10900Nm
2. Service factor: fs=19600NM
Please see the attached data for reference.
Thanks a lot for your confirmation!
Follow your request, the confirmed answer as below:
1. Output torgue max: M2=10900Nm
2. Service factor: fs=1.96
Please see the attached data for reference.
XWED 95-2065-2.2 with motor Y90L-2/2.2 KW 1500rpm 1psc
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
Unique Identifier:
Revision:
1
Page:
3 of 28
Tables
Table 1: Gearboxes ...................................................................................................................... 24
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
GEARBOX: TYPE: BEVEL HELICAL; RATIO: 14:1; SPEED: 1476/101.16 RPM; POWER: 151 KW; SHAFT SIZE: 50K6/105M6 MM; APPLICATION:
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
1.
Unique Identifier:
Revision:
1
Page:
4 of 28
Introduction
Kusile Power Station management decided to establish a long-term agreement for the supply of
some of the power Station鈥檚 strategic, critical, and operational plant spares. For the plant to operate
effectively and efficiently, maintenance must be performed at intervals specified as per plant
maintenance strategies. Correct plant spares are required to ensure maintenance is executed as per
the maintenance strategy requirements and thus must be always available. The identification of
which specific components to be kept as spares as well as the quantities has been done according
to the information available at the time of the compilation of this document.
The required information for spares holding has not been adequately detailed enough to enable the
full cataloguing of the identified spares into the SAP computer data base. This creates challenges to
the current and future procurement processes and may lead to costly delivery of wrongly specified
equipment. The works information processes outlined in this document are intended to eliminate or
minimize the risk of such occurrences.
2.
Supporting Clauses
2.1
Scope
The scope of work (SOW) specifies the required spares to be supplied by the Supplier on an as and
when required basis and conditions for acceptance. The scope included here does not substitute
procurement procedures that will be followed during the procurement process.
2.1.1 Purpose
The purpose of this document is to provide scope of work and technical information for the purchase
of Variable Speed drive Hydraulic coupling and their associated auxiliary equipment Spares and
ensure that all maintenance spares, which Kusile Power Station is procuring, are correct.
2.1.2 Applicability
This document is applicable to Kusile Power Station.
2.1.3
Effective date
This document will be effective from the date of its authorisation.
2.2
Normative/Informative References
Parties using this document shall apply the most recent edition of the documents listed in the
following paragraphs.
2.2.1 Normative
[1] ISO 9001 Quality Management Systems
[2] 36-681 Generation Plant Safety Regulations
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
Unique Identifier:
Revision:
1
Page:
5 of 28
[3] 32-727 SHEQ Policy
[4] 240-83797737 In- Service monitoring of Lubricating oils and Hydraulic fluids
[5] 240-84513751: Material Specification and Certification Guideline for Power Generation Plant
[6] 240-86546783: Procurement Standard for Material Certification Requirements Applicable to
Metallic Products Used on Low and Medium Pressure Applications
[7] 240-54820279: Receive Materials
[8] BS EN 10204 (2004) - Metallic products -Types of Inspection Documents
[9] 240-106024999_Kusile Power Station Feedwater and HP Heating Maintenance Spares Strategy
[10] Table 1 鈥揤ariable Speed drive Hydraulic coupling spares
[11] Table 2 鈥 List of Standards applicable for use
2.2.2 Informative
N/A
2.3
Definitions
Definition
Contractor
Explanation
Service provider contracted to provide a specific spares & documentation to
Kusile Power Station. Referred to as the Supplier on this document.
Employer
Kusile Power Station
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
Definition
Disclosure
Classification
2.4
Unique Identifier:
Revision:
1
Page:
6 of 28
Explanation
Controlled Disclosure to external parties (either enforced by law, or
discretionary).
Abbreviations
Abbreviation
2.5
Description
ISO
International Organisation for Standardisation
KPI
Key Performance Indicator
OEM
Original Equipment Manufacturer
OHS
Occupational Health & Safety
PSR
Plant Safety Regulations
SHEQ
Safety, Health, Environmental & Quality
SOW
Scope Of Work
Roles and Responsibilities
2.5.1 Contractor
a) To Supply and Deliver Gearboxes鈥 for Kusile Power Station according to the specifications
and technical requirements on this document.
b) Contractor shall submit all documentation as requested by the Employer.
2.5.2 Employer
a) Compiles and submit scope of work with technical specifications.
b) Performs Quality Control of all spares on delivery at the Employer premises.
2.6
Process for Monitoring
This document will be a once-off document to state the scope of work to supply and deliver Gear
Pumps contract.
2.7
Related/Supporting Documents
N/A
3.
Scope
To supply and deliver Gearboxes鈥 Scope of Work
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
No
Material
Number
Unique Identifier:
Revision:
1
Page:
7 of 28
Long Text
Units
1 0574042
GEARBOX: TYPE: PLANETARY; RATIO: 735.8:1;
SPEED: VARIABLE; POWER: 33.9 KW; SHAFT SIZE:
UNIVERSAL 00/200 MM; APPLICATION:
HYDRAULIC DRIVE; ROTATION DIRECTION:
CLOCK/ANTI CLOCKWISE; MANUF P/N:
SL12004/FAR/736/00; HOLLOW SHAFT TYPE FAR
SPLINED; UNIVERSAL INPUT WITH INPUT SAE
CVENDORS ARE RESPONSIBLE FOR ENSURING
THAT THEY ARE PERFORMING AGAINST THE
CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE).
2 0618357
GEARBOX: TYPE: ACTUATOR; RATIO: 53.1; SPEED:
16 RPM; POWER: 0.18 KW; SHAFT SIZE: DIA 20
MM; ROTATION DIRECTION: CLOCKWISE FROM
INPUT; SUPPL P/N: GS80.3; VENDORS ARE
RESPONSIBLE FOR ENSURING THAT THEY ARE
PERFORMING AGAINST THE CORRECT DRAWING
REVISION NUMBER (IF APPLICABLE).
3 0618358
GEARBOX: TYPE: ACTUATOR; RATIO: 51.1; SPEED:
16 RPM; POWER: 0.09 KW; SHAFT SIZE: DIA 16
MM; ROTATION DIRECTION: CLOCKWISE FROM
INPUT; SUPPL P/N: GF50.3; VENDORS ARE
RESPONSIBLE FOR ENSURING THAT THEY ARE
PERFORMING AGAINST THE CORRECT DRAWING
REVISION NUMBER (IF APPLICABLE).
4 0618359
GEARBOX: TYPE: ACTUATOR; RATIO: 442:1 TO 8:1;
SPEED: 16 RPM; POWER: 0.09 KW; SHAFT SIZE:
DIA 20 MM; ROTATION DIRECTION: CLOCKWISE
FROM INPUT; SUPPL P/N: GS160.3/GZ 160.3;
VENDORS ARE RESPONSIBLE FOR ENSURING THAT
THEY ARE PERFORMING AGAINST THE CORRECT
DRAWING REVISION NUMBER (IF APPLICABLE).
10
10
10
10
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
GEARBOX: TYPE: BEVEL HELICAL; RATIO: 14:1; SPEED: 1476/101.16 RPM; POWER: 151 KW; SHAFT SIZE: 50K6/105M6 MM; APPLICATION:
Unique Identifier:
Revision:
1
Page:
8 of 28
5 0618360
GEARBOX: TYPE: ACTUATOR; RATIO: 434:1 TO 8:1;
SPEED: 16 RPM; POWER: 0.09 KW; SHAFT SIZE:
DIA 20 MM; ROTATION DIRECTION: CLOCKWISE
FROM INPUT; SUPPL P/N: GS200.3/GZ200.3;
VENDORS ARE RESPONSIBLE FOR ENSURING THAT
THEY ARE PERFORMING AGAINST THE CORRECT
DRAWING REVISION NUMBER (IF APPLICABLE).
10
6 0618361
GEARBOX: TYPE: ACTUATOR; RATIO: 411:1-8:1;
SPEED: 16 RPM; POWER: 4 KW; ROTATION
DIRECTION: CLOCKWISE FROM INPUT; SUPPL P/N:
GS250.3/GZ250.3; VENDORS ARE RESPONSIBLE
FOR ENSURING THAT THEY ARE PERFORMING
AGAINST THE CORRECT DRAWING REVISION
NUMBER (IF APPLICABLE).
10
7 0619943
GEARBOX: TYPE: BEVEL HELICAL; RATIO: 20:1;
SPEED: 1476/74.45 RPM; POWER: 122 KW; SHAFT
SIZE: 35M6/105M6 MM; APPLICATION:
CONVEYOR DRIVE 3 STG; ROTATION DIRECTION:
ANTI CLOCKWISE; DRAWING NO: 97-QHRC3-794
REV 0; OUTPUT SHAFT ON THE RIGHT HAND
SIDEVENDORS ARE RESPONSIBLE FOR ENSURING
THAT THEY ARE PERFORMING AGAINST THE
CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE).
8 0619945
GEARBOX: TYPE: BEVEL HELICAL; RATIO: 14:1;
SPEED: 1476/101.16 RPM; POWER: 151 KW;
SHAFT SIZE: 50K6/105M6 MM; APPLICATION:
CONVEYOR DRIVE 2 STG; ROTATION DIRECTION:
CLOCKWISE; DRAWING NO: 97-QHR2-784 REV 0;
OUTPUT SHAFT ON THE LEFT HAND SIDEVENDORS
ARE RESPONSIBLE FOR ENSURING THAT THEY ARE
PERFORMING AGAINST THE CORRECT DRAWING
REVISION NUMBER (IF APPLICABLE).
10
10
CONTROLLED DISCLOSURE
When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to
ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by
third parties without the written consent of Eskom Holdings SOC Ltd, 漏 copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30
Kusile Power Station Supply and Delivery of
Gearboxes Scope of Work
Unique Identifier:
Revision:
1
Page:
9 of 28
9 0623751
GEARBOX: TYPE: HELICAL DRIVE; RATIO: 1267:1;
SPEED: 1460/1.2 RPM; POWER: 9.36 KW; SHAFT
SIZE: DIA 130 MM; APPLICATION: GEARED
MOTORS; ROTATION DIRECTION: BI DIRECTIONAL;
SUPPL P/N: BF90X-71W/D16DA4WTF/SP/C3; GAS
AIR HEATER 1/2 FLUE GAS AIR SIDE
DRIVEVENDORS ARE RESPONSIBLE FOR ENSURING
THAT THEY ARE PERFORMING AGAINST THE
CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE).
10 0634798
GEARBOX: TYPE: BHELICAL AND SPIRAL BEVEL
GEAR; RATIO: 20:1; SPEED: 1500/74.51 RPM;
POWER: 404 KW; SHAFT SIZE: 60/55 MM;
APPLICATION: CONVEYOR DRIVE T1B; ROTATION
DIRECTION: CLOCKWISE; DRAWING NO: 97QHRF3-794 REV 0; SUPPL P/N: QHRF3-CRN;
HORIZONTAL LOW SPEED SHAFT; RIGHT-ANGLE
SHAFT; 2 STAGE; HIGH SPEED SHAFT TENSION:
RIGHT-ANGLE; LOW SPEED SHAFT EXTENSION:
LEFT; LOW SPEED SHAFT TYPE: NORMAL SOLID
SHAFTVENDORS ARE RESPONSIBLE FOR ENSURING
THAT THEY ARE PERFORMING AGAINST THE
CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE).
11 0634804
GEARBOX: TYPE: BHELICAL AND SPIRAL BEVEL
GEAR; RATIO: 16:1; SPEED: 1500/93.75 RPM;
POWER: 70 KW; SHAFT SIZE: 45/90 MM;
APPLICATION: CONVEYOR DRIVE; ROTATION
DIRECTION: CLOCKWISE; DRAWING NO: 97QHRB2-788 REV 0; SUPPL P/N: QHRB2-CRN;
HORIZONTAL LOW SPEED SHAFT; RIGHT-ANGLE
SHAFT; 2 STAGE; HIGH SPEED SHAFT TENSION:
RIGHT-ANGLE; LOW SPEED SHAFT EXTENSION:
LEFT; LOW SPEED SHAFT TYPE: NORMAL SOLID
SHAFTVENDORS ARE RESPONSIBLE FOR ENSURING
THAT THEY ARE PERFORMING AGAINST THE
CORRECT DRAWING REVISION NUMBER (IF
APPLICABLE).
10
10
10
GEARBOX: TYPE: BEVEL HELICAL; RATIO: 14:1; SPEED: 1476/101.16 RPM; POWER: 151 KW; SHAFT SIZE: 50K6/105M6 MM; APPLICATION:
