Gearbox Kumera LGAM-4250-RAN1-38F electric motor WEG
Gearbox Kumera LGAM-4250-RAN1-38F electric motor WEG
№ | Full name of the goods and materials, Brand, GOST, technical specifications and other specifications | measure unit | Quan tity | |
1 | Gear motor, cylindrical, single stage | 1. Product name: Reducer EK88-K4-160 complete with electric motor 1TZ9011-1DR43-4GA-Z with a rated power of 14kW 2. Description and required functional, technical, qualitative and operational characteristics of the product: Name: EK 88K 4-(160) motor type with helical gear EK 88K 4-(160) engine power (kW): 3.3/14 rated torque (Nm): 240 Anti-corrosion base: 2 Painting: RAL 7031 (blue-grey) Mounting position: V1 Description: Shaft diameter (mm): 45.0 flange Ø (mm): 300.0 overall reduction i: 2.45 lubricant mineral oil CLP: 220 motor version three-phase squirrel-cage motor with pole reversal rated voltage (V): 400 In chain: Y/YY frequency (Hz): 50 degree of protection: (IP) Motor protection IP65 I temperature sensor (PTC) trips special design motor with fixed bearings on side A for standard ambient temperature (°C) (-20 to +40) protective cover with an overlay on the fan shroud 3. Other characteristics: compliance with GOST 31591-2012. 4. Guarantee for the quality of purchased goods (if necessary): 12 months. 5. Completeness of delivery: passport for the provided goods, technical specification of the goods. | pcs | 1 |
Regards, | Evgeny Zubov | |||
Procurement Specialist | ||||
BIN: 180340003802, IIC: KZ186017181000001355, JC «Halyk Bank Kazakhstan» BIC HSBKKZKX |
1 Gearbox Kumera LGAM-4250-RAN1-38F electric motor WEG, safety sprocket Z17, with shear pins - 20 pcs, with high-speed coupling - 2 pcs pc 2 Kumera
Request Number | VOCAB NO | DESCRIPTION | QUANTITY | UNIT | UNIT PRICE | EXTENDED PRICE |
Complete Mixers with Gearbox reducer and Electric motor. Item :-151 v 10 C/D Service : Additive drum mixers Volume handled - 3 m³ Av. Specific gravity 1.05 Viscosity :- 1500 cps at operating temp. Operating pressure:- Hydro kg/cm² Operating temp 65 °C max RPM:- 272 No. of Impeller: 2 Small impeller diameter 285 Large impeller diameter 300mm 600mm Space between two impellers :- Impeller& Shaft material :- AISI 316 Shaft length 1350mm Shaft diameter 16mm ORIGIN mixers :-ENGLAND.U.S.A.FRANCE, AUSTRIA., GERMANY,Holland MOTOR SPECIFICATION:- -Three phase Induction Motor -Voltage: 380 V, 50 HZ -Explosion proof type: ExdIIB T3-T4 or ExdlIC T3-T4 -Amb Temp: (45-50) C". -IP: 54 or 55. -Duty : S1 -Insulation Class: F -(Origin) Germany, Finland, JAPAN, Sweden, Brazil | 2 | Set | $- |
Coveyer Motors | ||||||||||
Sr No | Name | Description | Shaft size (dia X length) | Flange type/Feet type | Flange size/ Feet size | Machine | Nos | Name plate | motor picture | body type |
1 | small conveyer | 0.18KW/ 0.66A/ 4P | 11X23 mm | Flange type | 140 mm | Ref#1+Ref#2 | 25 | SILVER | ||
2 | feeding conveyer | 0.25KW/ 0.92A/ 6P | 24X50 mm | Flange type | 200 mm | Ref#1+Ref#2+Optical | 3 | CI | ||
3 | Fan Motor | 0.104KW/ 0.26A/ 2P | 11X23 mm | 140 mm | Ref#1+Ref#2+Optical | 3 | steel | |||
4 | P1 Conveyer Motor | 0.37KW/ 1.12A/ 6P | 19X40 mm | Flange type | 200 mm | Ref#1+Ref#2+ECP | 3 | CI | ||
5 | P1 Motor Fan | .144KW/ 0.36A/ 2P | 11X23 mm | 140 mm | Ref#1+Ref#2+ECP | 3 | CI | |||
6 | Loading Belt to tables | 0.37KW/ 1.12A/ 4P | 11X23 mm | Flange type | 140 mm | Ref#1+Ref#2 | 6 | SILVER | ||
7 | conveyer motor | 2.2kw/ 4.9A/4P | 28X60 mm | Flange type | 250 mm | mega 1500+1100+1000+ECP+ REF#1&2 | 19 | CI | ||
8 | Main Convoyer | 4KW/ 7.4A/ 4P | 28X60 mm | flange type | 250 mm | Mega 1100 | 1 | CI | ||
9 | Motor Fan | .144KW/ .36A/ 2P | 11X23 mm | 140 mm | Mega 1100 | 1 | steel | |||
10 | Main Conveyer | 5.5KW/ 11A/ 4P | 38X80 mm | Flange type | 300 mm | Mega 1500 | 1 | CI | ||
11 | Cooling Fan | .17KW/.5A/ 4P | 11X23 mm | 140 mm | Mega 1500 | 1 | ||||
12 | ECP Belt | 3KW/ 6.6A/ 4P | 28X60 mm | Flange type | 250 mm | ECP | 1 | CI | ||
Steller Valve Motors | ||||||||||
1 | cyclones | 0.75KW/ 1.79A/ 2P | 24X50 mm | Flange type | 200 mm | Ref#1+Ref#2 | 10 | CI | ||
2 | RAF mills | 1.1KW/ 2.6A/ 4P | 24X50 mm | Flange type | 200 mm | Ref#1+Ref#2 | 4 | CI | ||
3 | Bag Filter | 0.75KW/ 1.79A/ 4P | 19X40 mm | Flange type | 200 mm | DCS1+DCS2 | 1 | CI | ||
Aspirator Motors | ||||||||||
1 | Aspirator 1 | 7.5KW/ 14.2A/ 2P | 38X80 mm | Feet type | 300 mm | Ref#1+Ref#2 | 2 | CI | ||
2 | RAF-M fan | 7.5KW/ 14.2A/ 2P | 38X80 mm | Feet type | 300 mm | Ref#1+Ref#2 | 2 | CI | ||
3 | Aspirator | 15KW/ 27.3A/ 2P | 42X110 mm | Feet type | 350mm | Ref#1+Ref#2 | 6 | CI | ||
4 | Aspirator table 1 &2 | 3KW/ 6.3A/ 2P | 28X60 mm | Feet type | 250 mm | Ref#1+Ref#2 | 4 | CI | ||
5 | Aspirator table 3&4 | 2.2KW/ 4.5A/ 2P | 24X50 mm | Feet type | 200 mm | Ref#1+Ref#2 | 4 | CI | ||
6 | RAF-F fan | 2.2KW/ 4.9A/ 2P | 24X50 mm | Flange type | 200 mm | Ref#1+Ref#2 | 2 | CI | ||
7 | DCS | 55KW/ 98A/ 4P | 65X140 mm | Feet type | 550mm | DCS1+DCS2 | 2 | CI | ||
Vibrator motors | ||||||||||
1 | P7 Vibration Motors | 0.07KW/ 0.31A/ 4P | 9X20 mm | Feet type | 120 mm | Ref#1+Ref#2 | 4 | CI | ||
2 | P3 Vibration Motor | 0.12KW/ 0.49A/ 4P | 11X23 mm | Feet type | 140 mm | Ref#1+Ref#2 | 8 | CI | ||
3 | Vibration Motors table 3&4 | 0.12KW/ 0.4A/ 6P | 11X23 mm | Feet type | 140 mm | Ref#1+Ref#2 | 8 | CI | ||
4 | Vibration Motors table 1&2 | 0.25KW/ 0.67A/ 6P | 14X30 mm | Feet type | 160 mm | Ref#1+Ref#2 | 8 | CI | ||
5 | Vibration motors | 0.9KW/ 1.8A/ 6P | 24X50 mm | Feet type | 200 mm | ECP | 2 | CI | ||
6 | Vibrator | 2.2kw/ 4.9A/4P | 28X60 mm | Feet type | 250 mm | Dynamic shake | 2 | CI | ||
7 | Vibrator A & B | 3.2KW/ 6.5A/ 6P | 38X80 mm | Feet type | 300 mm | Dynamic shake | 4 | CI | ||
Sieve Motors | ||||||||||
1 | sieve motor | 1.1KW/ 2.7A/ 4P | 24X50 mm | Flange type | 200 mm | Ref#1+Ref#2 | 10 | CI | ||
Rotational Magnet motors | ||||||||||
1 | SS separation | 0.55KW/ 1.46A/ 4P | 19X40 mm | Flange type | 200 mm | Ref#1+Ref#2 | 4 | SILVER | ||
2 | SS separation | 0.25KW/ 0.79A/ 4P | 14X30 mm | Flange type | 160 mm | Ref#1+Ref#2 | 2 | SILVER | ||
3 | magnetic Belt | 2.2KW/ 4.9A/ 4P | 28X60 mm | Flange type | 250 mm | Dynamic shake | 2 | SILVER | ||
4 | Magnetic Drum | 4KW/ 8.3A/ 4P | 28X60 mm | Flange type | 250 mm | Mega 1500+Mega 1100 | 2 | SILVER | ||
5 | ECP Rotational magnet | 5.5KW/ 11A/ 2P | 38X80 mm | Flange type | 300 mm | ECP | 1 | CI | ||
separating drum | ||||||||||
1 | separating drum | 3KW/ 6.4A/ 4P | 28X60 mm | Flange type | 250 mm | Ref#1+Ref#2+ECP | 3 | CI | ||
Hydrualic motors | ||||||||||
1 | Hydrulic | 18.5KW/ 33.5A/ 4P | 48X110 mm | Flange type | 350mm | Mega 1500 | 1 | CI | ||
2 | Hydrulic | 11KW/ 20.68A/ 4P | 42X110 | flange type | 350mm | Mega 1100 | 1 | CI | ||
3 | Hydrulic | 5.5KW/ 11A/ 4P | 38X80 mm | Flange type | 300 mm | mega 1000 | 1 | CI | ||
Vibrating table motors | ||||||||||
1 | Vibrator (Top) | 11KW/ 21.9A/ 6P | 42X110 mm | Feet type | 350mm | Mega 1500+Mega 1100 | 2 | CI | ||
2 | Vibrator (Bottom) | 22KW/ 42.6A/ 6P | 55X110 mm | Feet type | 400 mm | Mega 1500+Mega 1100 | 2 | CI | ||
3 | Vibrator (Top) | 5.5KW/ 12.5A/ 6P | 38X80 mm | Feet type | 300 mm | mega 1000 | 1 | CI | ||
4 | Vibrator (Bottom) | 7.5KW/ 16.1A/ 6P | 42X110 mm | Feet type | 350mm | mega 1000 | 1 | CI | ||
Hammer motors | ||||||||||
1 | Main Hammer | 450kw/ 815A/6P | Feet type | Mega 1500 | 1 | CI | ||||
2 | Main Hammer | 355kw/ 606.5A/4P | Feet type | Mega 1100 | 1 | CI | ||||
3 | Main Hammer | 315kw/ 525A/4P | Feet type | mega 1000 | 1 | CI | ||||
4 | M Hammer | 132KW/ 229A/ 2P | Feet type | Ref#1+Ref#2 | 2 | CI | ||||
5 | F Hammer | 90KW/ 155A/ 4P | 75X140 mm | Feet type | 550mm | Ref#1+Ref#2 | 2 | CI | ||
Other motors | ||||||||||
1 | Double rotary valve | 0.37KW/ 1.06A/ 4P | 14X30 mm | Flange type | 160 mm | Ref#1+Ref#2 | 2 | CI | ||
2 | Rotary shaft | 1.5KW/ 3.5A/ 4P | 24X50 mm | Flange type | 200 mm | DCS1+DCS2 | 2 | CI |
MV DRIVE SPARES | |||||
S/N | DESCRIPTION | UNIT | QTY | UNIT PRICE | TOTAL PRICE |
1 | DATA INTERFACE TU810V1/NO: 3AFE6402646 1( DATA INTERFACE TU810V1;INDENT NO.:3AFE64026461; DESIGNATION:A2511 ;REQUIRED FOR BH FAN: TYPE:ACS5066-A1B-M5-A0-0; * S.NO.:2UBA905000687;ORDER NO.:500839230 AND ID FAN: TYPE:ACS5066-A2B-M5-A0- 0; S.NO.:2UBA905000686;ORDE R NO.:500839230 ) Item Text:(DATA INTERFACE TU810V1;INDENT NO.:3AFE64026461; DESIGNATION:A2511;REQUIR ED FOR BH FAN: TYPE: ACS5066-AIB-M5-A0-0 | NO | 1 | ||
2 | UF C921 A101: INT-2 BOARD VARNISHED (* UF C921 A101: INT-2 BOARD VARNISHED;INDENT NO.: 3BHE024855R0101;DESIGNATION:A2411 ;REQUIRED FOR BH FAN: TYPE:ACS5066-A1B-M5-A0-0;* S.NO.:2UBA905000687;ORDER NO.:500839230 AND ID FAN:TYPE:ACS5066-A2B-M5-A0-0; S.NO.:2UBA905000686;ORDER NO.:500839230 ) Item Text:(UF C921 A101: INT-2 BOARD VARNISHED;INDENT NO.:3BHE024855R0101; DESIGNATION:A2411; REQUIRED FOR BH FAN: TYPE : ACS5066-A1B-M5-A0-0 | NO | 1 | ||
3 | HIGH VOLTAGE RELAIS G81A 019, 10KV,30A( * HIGH VOLTAGE RELAIS G81A 019, 10KV, 30A;INDENT NO.:3BHE031468R1447; DESIGNATION:K1091 ;REQUIRED FOR BH FAN:* TYPE:ACS5066-A1B-M5-A0- 0; S.NO.:2UBA905000687;ORDE R NO.:500839230 AND ID FAN: TYPE:ACS5066-A2B-M5-A0-0; S.NO.:2UBA905000686;ORDER* NO.:500839230 )Item Text:(HIGH VOLTAGE RELAIS G81A 019, 10KV, 30A;INDENT NO.:3BHE031468R1447;DESIGNATION:K1091 ;REQUIRED FOR BH FAN: TYPE:ACS5066-A1B-M5-A0-0 | NO | 1 | ||
4 | LOCK FR CS5000A;INDET NO:2UBA000023R0001 ( * LOCK FOR CS5000A;INDENT NO.:2UBA000023R0001;DESI GNATION:S2811;REQUIRED FOR BH FAN: TYPE:ACS5066-A1B-M5-A0-0; * S.NO.:2UBA905000687;ORDER NO.:500839230 AND ID FAN: TYPE:ACS5066-A2B-M5-A0 0;S.NO.:2UBA905000686;ORDER NO.:500839230 ) Item Text:(LOCK FOR CS5000A;INDENT NO.:2UBA000023R0001;DESI GNATION:S2811;REQUIRED FOR BH FAN:TYPE:ACS5066-A1B-M5-A0-0) | NO | 1 | ||
5 | POWER SUPPLY 230VAC/30-40VDC 280W( * POWER SUPPLY 230VAC/30-40VDC 280W;INDENT NO.:3BHB017688R0001;DESIGNATION:G7311 ;REQUIRED FOR BH FAN: TYPE:ACS5066-A1B-M5-A0-0; * S.NO.:2UBA905000687;ORDER NO.:500839230 AND ID FAN: TYPE:ACS5066-A2B-M5-A0-0;S.NO.:2UBA905000686;ORDER NO.:500839230 ) Item Text:(POWER SUPPLY 230VAC/30-40VDC 280W;INDENTNO.:3BHB01768 8R0001;DESIGNATION:G7311 ;REQUIRED FOR BH FAN: TYPE:ACS5066-A1B-M5-A0-0 | NO | 1 | ||
6 | POWER SUPPLY QUINT-PS/1AC/24DC/10( * POWER SUPPLY QUINTPS/1AC/24DC/10;INDENT NO.:3BHE016113R0110; DESIGNATION:G1201&.11 ;REQUIRED FOR BH FAN: TYPE:ACS5066-A1B-M5-A0-0;* S.NO.:2UBA905000687;ORDER NO.:500839230 AND ID FAN TYPE:ACS5066-A2B-M5-A0-0; S.NO.:2UBA905000686;ORDER NO.:500839230 ) Item Text:(POWER SUPPLY QUINTPS/ 1AC/24DC/10;INDENTNO. :3BHE016113R0110;DESIGNATION :G1201&.11 ;REQUIRED FOR BH FAN:TYPE:ACS5066-A1B-M5-A0-0) | NO | 1 | ||
7 | SAFETY RELAY LG5925.48/6X 24V AC DC( * SAFETY RELAY LG5925.48/6X 24V AC DC 3AUA0000046634 ABB OR EQUIVALENT MAKE ) Item Text:(SAFETY RELAY LG5925.48/6X 24V AC DC 3AUA0000046634 ABB OR EQUIVALENTMAKE) | NO | 1 | ||
8 | CURRENT TRANSDUCE SCH-5-200 A/7525A35G05( * CURRENT TRANSDUCE SCH-5-200 A/7525A35G05, CURRENT TRANSFORMER; SCH-5 / 200:5A I/N: 3BHB016196R0005, STYLE NO 7525A35G05 Item Text:(CURRENT TRANSDUCE SCH-5-200 A/7525A35G05, CURRENT TRANSFORMER; SCH-5200:5A I/N: 3BHB016196R0005, STYLE NO 7525A35G05) | NO | 1 | ||
9 | ARRESTERS POLIMD14NUR= 17.5KV,UC=14KV( * ARRESTERS POLIM-D 14 N UR=17.5KV, UC=14KV, ABB PART NO. 3BHB013574R1750, REQUIRED FOR LINE5-ACS5000 VFDS -RM FAN-41FN01,CM BH FAN * -84FN01,KILN ID FAN -54FN01 & RMBH FAN 54FN02 ) Item Text:(RRESTERS POLIM-D 14 N UR=17.5KV, UC=14KV, ABB PART NO. 3BHB013574R1750,REQUIRED FOR LINE5-ACS5000) | NO | 1 | ||
TOTAL | |||||
FREIGHT CHARGES- AIR FREIGHT | |||||
COO | |||||
SGS | |||||
GRAND TOTAL |
PFISTER SPARES | |||||
S/N | DESCRIPTION | UNIT | QTY | UNIT PRICE | TOTAL PRICE |
1 | TERMINAL,KL9190,893.800. 11.12,BECKHOFF (* PFISTER ROTO FEEDER PANEL TERMINAL KL9109,MAKE:BECKHOFF,S.R.NO:893.800.11.12 ) Item Text:(PFISTER ROTO FEEDER PANEL TERMINAL KL9109, MAKE:BECKHOFF,S.R.NO:893.800.11.12) | NO | 1 | ||
2 | TERMINAL,KL9080,893.800. 90.12,BECKHOFF ( * PFISTER ROTO FEEDER PANEL TERMINALKL9080,MAKE:BECK HOFF,S.R.NO:893.800.90.1 2 ) Item Text:(PFISTER ROTO FEEDER PANEL TERMINAL KL9080,MAKE:BECK HOFF,S.R.NO:893.800.90.12 | NO | 1 | ||
3 | TERMINAL,KL9010,893.800. 90.10,BECKHOFF ( * PFISTER ROTO FEEDER PANEL TERMINAL KL9010, MAKE:BECKHOFF,S.R.NO:893.800.90.10 ) Item Text:(PFISTER ROTO FEEDER PANEL TERMINAL KL9010, MAKE:BECKHOFF,S.R.NO:893.800.90.10) | NO | 1 | ||
4 | BRAKE RESISTOR BW100-003 893.910.10.22 ( * BRAKE RESISTOR BW100-003 893.910.10.22,SEW,COMPONENT DESIGN 52RF01+E1- / R1.1,R1.2,R1.3 AND R1.4-COMPLETE SET /) Item Text:(BRAKE RESISTOR BW100-003 893.910.10.22,SEW,COMPONENT DESIGN 52RF01+E1-R1.1,R1.2,R1.3 AND R1.4- COMPLETE SET | NO | 1 | ||
5 | BRAKE RESISTOR,SK BR4-60/600 ( * BRAKE RESISTOR, SK BR4- 60/600;893.910.55.63, MAKE:NORD )Item Text:(BRAKE RESISTOR,SK BR4- 60/600;893.910.55.63,MAKE:NORD) | NO | 1 | ||
6 | POWER SUPPLY PULSED;PN: 893.207.25.60 ( * POWER SUPPLY PULSED ;PART NO.: 893.207.25.60;SUITABLE FOR ROTOR WEIGH FEEDER TYPE:DRW 4.14;MATERIAL:FINE COAL; MAIN ORDER * NO.:D0A43778D0; MAKE:PFISTER ) Item Text:( POWER SUPPLY PULSED ;PART NO.: 893.207.25.60 ;SUITABLE FOR ROTOR WEIGHFEEDER TYPE:DRW 4.14;MATERIAL:FINE COAL; MAIN ORDERNO.:D0A43778D0; MAKE:PFISTER | NO | 1 | ||
7 | CHOKE,SK CO1-460/33-C ( * CHOKE,SK CO1-460/33- C,PM:893.910.55.83,MAKE: NORD ) Item Text:(CHOKE,SK CO1-460/33-C, PM:893.910.55.83, MAKE NORD) | NO | 1 | ||
8 | FDC -010 BASIC + PROFIBES SLAVE( * FDC -010 Basic + Profibus Slave, Item no:FD2.120.00.00 / ) Item Text:(FDC -010 Basic + Profibus Slave, Item no:FD2.120.00.00 (891.461.00.10) | NO | 1 | ||
9 | COMMUNICATION UNIT;PART NO:893.800.10.16 ( * COMMUNICATION UNIT ;PART NO.:893.800.10.16 ;SUITABLE FOR ROTOR WEIGH FEEDER TYPE:DRW 4.14;MATERIAL:FINE COAL; MAIN ORDER * NO.:D0A43778D0; MAKE:PFISTER ) Item Text:(COMMUNICATION UNIT ;PART NO.:893.800.10.16 ;SUITABLE FOR ROTOR WEIGHFEEDER TYPE:DRW 4.14;MATERIAL:FINE COAL; MAIN ORDER NO.:D0A43778D0; MAKE:PFISTER | NO | 1 | ||
10 | FDMV MEAS.AMPLIFIER, 891.445.10.00.( | NO | 1 | ||
TOTAL | |||||
FREIGHT CHARGES-AIR FREIGHT | |||||
COO | |||||
SGS | |||||
GRAND TOTAL |
Allen bradley 1734-IB8S 300 136.01 124.75 Original New Sealed 5-7 days
Allen bradley 1734-OE2V 300 77.14 70.76 Original New Sealed 5-7 days
Allen bradley 1783-BMS20CA 73 1703.68 1562.68 Original New Sealed 5-7 days
Allen bradley 1734-OB8S 276 142.10 130.34 Original New Sealed 5-7 days
Allen bradley 20-750-DENC-1 300 85.26 78.20 Original New Sealed 5-7 days
Allen bradley 1756-EN2TR 300 1004.85 921.69 Original New Sealed 5-7 days
Allen bradley 20G11NC5P0JA0NNNNN 300 969.33 889.11 Original New Sealed 5-7 days
Allen bradley 1734-EP24DC 300 46.18 42.36 Original New Sealed 5-7 days
Allen bradley 1756-PB72 234 358.80 329.11 Original New Sealed 5-7 days
Allen bradley 1734-OB8 114 39.48 36.22 Original New Sealed 5-7 days
Allen bradley 20-750-S3 171 102.72 94.22 Original New Sealed 5-7 days
Allen bradley 1734-IE8C 277 257.61 236.29 Original New Sealed 5-7 days
Allen bradley 1756-EN2T 293 783.38 718.55 Original New Sealed 5-7 days
Allen bradley 1756-IB16I 300 233.25 213.94 Original New Sealed 5-7 days
Allen bradley 1756-IB32 300 186.25 170.84 Original New Sealed 5-7 days
Allen bradley 1756-IF4FXOF2F 121 1060.98 973.17 Original New Sealed 5-7 days
Allen bradley 1756-L72 29 2279.28 2090.65 Original New Sealed 5-7 days
Allen bradley 1756-M03SE 133 568.40 521.36 Original New Sealed 5-7 days
Allen bradley 1756-N2 182 10.25 9.40 Original New Sealed 5-7 days
Allen bradley 1756-OB32 300 230.10 211.06 Original New Sealed 5-7 days
Allen bradley 1756-PA72 235 301.25 276.32 Original New Sealed 5-7 days
Allen bradley 1756-TBNH 270 24.56 22.53 Original New Sealed 5-7 days